stangin2005 wants to know: “I’m looking for the best lowering springs I can get for my 2005 Mustang GT without having to buy all sorts of camber and caster adjusters. I want the best ride quality possible!! What springs do you recommend and can I go an inch and a half?”
Great question, stangin! Lowering your Mustang has a number of benefits, the most noticeable being appearance and performance. By lowering the vehicle, you lower the center of gravity, which greatly improves handling and reduces body roll & nose-dive. Unsightly wheel gap is also eliminated, giving your Stang a sleek, intimidating look (especially over a set of 17”, 18” or 19” wheels).
Lowering kits that are designed solely for performance gains often make big sacrifices when it comes to ride quality, and lowering the car more than 1.5” will require caster/camber plates and a ball joint kit to properly realign the suspension. Considering you want to maintain decent ride quality, I’d recommend the Eibach Pro-Kit; match it with the Eibach Pro-Damper kit or a set of Tokico shocks & struts and you’ve got a great performance suspension without sacrificing ride quality, or rattling your teeth out of your skull!
The Eibach kit lowers the front 1.3” and the rear 1.4” (approximately), so a simple alignment after installation should be all you need to get your pony rolling again. This is the same set of lowering springs that we installed in our 2011 Mustang project car, and we’ve taken that car both to the track and the grocery store. Best of luck with your suspension and keep the questions coming!
Michael Gross’s 2004 Mach 1!
Michael’s azure blue Mach 1 features 18X9 and 18X10 Bullitt wheels paired with a set of Michelin tires. When he picked the Mustang (which he calls his “play toy”) up it had about 37,000 miles on it and was far from the modded beast it is today. The Mach 1 sports a P-1SC ProCharger that’s intercooled at approximately 10lbs, 42lb injectors, a Wallbro 260 fuel pump, and a Kenne Bell BAP. Kooks long tube headers and catted x-pipe, and an SLP Loudmouth Mustang catback system make sure you can hear Michael coming. A PHP intake spacer, an SCT handheld tuner (with a custom tune), and 4.10 gears round out the performance mods.
The Mach’s interior, exterior, and suspension have all been customized, too. Michael’s added Maximum Motorsports caster/camber plates, H&R springs, and Bilstein shocks. He’s also performed an 03/04 Cobra IRS conversion and added subframe connectors. Not content with a stock-appearance sleeper, the exterior has a hood stripe, a 1″ shaker raise, a shorty antenna, and Luminics headlights and fog lights and the windows are tinted. On the interior, the rear seat has been deleted, Michael’s added an LED shift light, Phantom II boost and vacuum gauges, and an MGW short shifter. Billet interior knobs, a Mach 1 rubber trunk mat and floor mats, and an FR500 steering wheel round out the build.
Think your pony has what it takes to be the October Ride of the Month? Submit your entry before Saturday, September 25th. Entries are only good for a month, so make sure you submit yours again if you didn’t win for September.